Dr.Öğr.Üyesi NURETTİN FURKAN DOĞAN
GAZİANTEP ÜNİVERSİTESİ
MÜHENDİSLİK FAKÜLTESİ MAKİNA MÜHENDİSLİĞİ
Mühendislik Temel Alanı Makine Mühendisliği Kompozit Malzemeler Katı Cisimler Mekaniği Sonlu Elemanlar Analizi
GAZİANTEP ÜNİVERSİTESİ
MÜHENDİSLİK FAKÜLTESİ MAKİNA MÜHENDİSLİĞİ
ME 201 2nd Midterm Exam results can be found here: Students who want to see their exam papers can see their papers in the room of Res. Assist. Yetkin KARABULUT, located on the 4th floor of the department building, on 02.01.2023 between 13:30 and 14:30. |
ME 444 Matlab for Engineers 2nd Midterm Exam results can be found here: |
ME 444 Matlab for Engineers course presentations and practices will be posted on this page. ME 444 Exam Solutions: ME 444 Course Presentations: Ch. 2 Making Algorithms and Flow Charts Ch. 5 Programming in MATLAB (Script files) / User-Defined Functions and File Management Ch. 6 Control Structures Part 1 / Part 2 Ch. 7 Loops Ch. 8 Graphic Operations Ch. 9 Symbolic Operations in MATLAB ME 444 Practice and Solutions:
|
ME 201 MIDTERM 2 MAKE-UP EXAM DATE is on 30.12.2022 at 14:00 in ME Building 4th Floor. |
ME 201 Statics course presentations and problem-hour solutions will be posted on this page. Lecture Presentations Ch. 1 Introduction to Statics Ch. 4 Structures Ch. 5 Distributed Forces Centroids / Beams Appendix A. Area Moment of Inertia Notes on Shear-Moment Diagrams ENG / TR Problem Solution Hours Pr. 1 / Pr. 2 / Pr. 3 / Pr. 4 / Pr. 5 / Pr. 6 / Pr. 7 Quiz Results (UPDATED-17.12.2022) Exam Solutions
|
ME 201 1st Midterm Exam results can be found here: Students who want to see their exam papers can see their papers in the room of Res. Assist. Yetkin KARABULUT, located on the 4th floor of the department building, on 07.12.2022 between 13:30 and 14:30. |
ME 201 and ME 444 1st Midterm Examination Make-up Exams will be held on 02.12.2022 at 13:30 in my office. |
The course content and timetable of the Me 201 course are as follows.
|
1 |
Effect of graphene nanoplatelets on mechanical and impact properties of an aramid/glass-reinforced epoxy composite
DOĞAN NURETTİN FURKAN, ERKLİĞ AHMET, ÖZBEK ÖZKAN
|
|---|---|
2 |
Effect of Halloysite Nanotube Additive on Shear Strength in Al-GFRP Single Lap Adhesive Joint
ÖZBEK ÖZKAN, ÇAKIR MEHMET VEYSEL, DOĞAN NURETTİN FURKAN
|
3 |
Buckling analysis of graphene nanoplatelets doped carbon/aramid hybrid polymer composite plates
DOĞAN NURETTİN FURKAN
|
4 |
An experimental investigation on lateral crushing response of glass/carbon intraply hybrid filament wound composite pipes
ÖZBEK ÖZKAN, DOĞAN NURETTİN FURKAN, BOZKURT ÖMER YAVUZ
|
5 |
Nanographene inclusion effect on the mechanical and low velocity impact response of glass/basalt reinforced epoxy hybrid nanocomposites
ERKLİĞ AHMET,DOĞAN NURETTİN FURKAN
|
6 |
EFFECT OF NANO SILICA WITH EPOXY RESIN BONDED SINGLE-STRAP REPAIRS
Karaoğlan Harun,ERKLİĞ AHMET,DOĞAN NURETTİN FURKAN
|
7 |
Mechanical and low velocity impact characterization of carbon/glass hybrid composites with graphene nanoplatelets
DOĞAN NURETTİN FURKAN,BULUT MEHMET,ERKLİĞ AHMET,BOZKURT ÖMER YAVUZ
|
8 |
On the effect of nano particle inclusion in fiber reinforced composite tensile and flexural behavior
DOĞAN NURETTİN FURKAN,ERKLİĞ AHMET
|
9 |
On adhesive properties of perlite and sewage sludge ash with epoxy resin bonded single-strap repairs
BULUT MEHMET,ERKLİĞ AHMET,DOĞAN NURETTİN FURKAN
|
10 |
Charpy Impact Response of Glass Fiber Reinforced Composite with Nano Graphene Enhanced Epoxy
ERKLİĞ AHMET,DOĞAN NURETTİN FURKAN,BULUT MEHMET
|
11 |
Comparison of PIM and RPIM Solutions of Elasto Plastic Thick Beams
KANBER BAHATTİN,DOĞAN NURETTİN FURKAN
|
1 |
Comparative Study on the Vibration Behavior of Aluminum Alloys used in Aerospace Applications
DOĞAN NURETTİN FURKAN, ŞAHİN BURAK
|
|---|---|
2 |
INVESTIGATION OF SURFACE ROUGHNESS FOR INCONEL 718 AS AEROSPACE MATERIAL BY FLOW PEENING (GOV) PROCESS
GÖV KÜRŞAD, DOĞAN NURETTİN FURKAN, KALAK MURAT, KOCA MEHMET SAİT
|
3 |
CHARPY IMPACT RESPONSE OF CARBON-ARAMID INTRAPLY COMPOSITE WITH NANO GRAPHENE DOPED EPOXY
ERKLİĞ AHMET, DOĞAN NURETTİN FURKAN, ÖZDUMAN Fatih Harun
|
4 |
EFFECT OF NANO SLICA WITH EPOXY RESIN BONDED SINGLE-STRAP REPAIRS
ERKLİĞ AHMET,KARAOĞLAN HARUN,DOĞAN NURETTİN FURKAN
|
5 |
Effect of Seawater Aging Condition On Tensile Properties of Glass-Epoxy Composites
ERKLİĞ AHMET,OĞUZ ZEYNAL ABİDİN,DOĞAN NURETTİN FURKAN
|
6 |
Effect of Distilled Water Aging Condition On Tensile Properties of Glass-Epoxy Composites
ERKLİĞ AHMET,OĞUZ ZEYNAL ABİDİN,DOĞAN NURETTİN FURKAN
|
7 |
On the Low-Velocity Impact Behavior of Nanoparticle Filled Glass/Basalt Hybrid Composites
ERKLİĞ AHMET,DOĞAN NURETTİN FURKAN,OĞUZ ZEYNAL ABİDİN
|
8 |
Charpy impact response of Glass/Aramid hybrid fiber reinforced epoxy filled with Graphene Nano-Platelets
ERKLİĞ AHMET,DOĞAN NURETTİN FURKAN,OĞUZ ZEYNAL ABİDİN
|
9 |
Flexural Behavior of Nano Graphene Reinforced Hybrid Composite Laminates
ERKLİĞ AHMET,DOĞAN NURETTİN FURKAN
|
10 |
CHARPY IMPACT BEHAVIOR OF NANO GRAPHENE REINFORCED HYBRID COMPOSITE LAMINATES
ERKLİĞ AHMET,DOĞAN NURETTİN FURKAN
|
11 |
On the Effect of Nano Particle Inclusion in Fiber Reinforced Composite Tensile and Flexural Behavior
ERKLİĞ AHMET,DOĞAN NURETTİN FURKAN
|
12 |
On the Effect of Nano Particle Inclusion in Fiber Reinforced Composite Vibration Behavior
ERKLİĞ AHMET,DOĞAN NURETTİN FURKAN
|
13 |
Vibration Properties of Intraply Woven Carbon/Aramid Fiber Reinforced Composites with Nano Clay Particles
ERKLİĞ AHMET,BULUT MEHMET,DOĞAN NURETTİN FURKAN
|
14 |
Charpy Impact Response of Glass Fiber Reinforced Composite with Nano Graphene Enhanced Epoxy
ERKLİĞ AHMET,DOĞAN NURETTİN FURKAN,BULUT MEHMET
|
15 |
On the Vibration Behavior of Intraply Woven Carbon/Kevlar Reinforced Composites with Nano Silica Particle
ERKLİĞ AHMET,DOĞAN NURETTİN FURKAN,BULUT MEHMET
|
16 |
TENSILE STRENGTH OF DOUBLE LAP JOINTS BONDED WITH A MICROPARTICLE REINFORCED ADHESIVE
KÜTÜK MEHMET AKİF,DOĞAN NURETTİN FURKAN,ALDULAİMİ OMAR
|
17 |
KOMPOZİT MALZEMELERİN YAPIŞTIRILMASINDA PARÇACIK KATKILI YAPIŞTIRICILARIN YAPIŞTIRMA PERFORMANSINA ETKİSİ
KÜTÜK MEHMET AKİF,DOĞAN NURETTİN FURKAN
|
18 |
İndirgenmiş Noktasal İntegrasyon Kullanılarak Kalın Kirişlerin Elasto plastik Davranışlarının İncelenmesi
KANBER BAHATTİN,DOĞAN NURETTİN FURKAN
|
19 |
Comparison of PIM and RPIM solutions of Elasto-plastick Thick Beams
KANBER BAHATTİN,DOĞAN NURETTİN FURKAN
|
20 |
İNCE KİRİŞLERİN ELASTİK DAVRANIŞLARININ NİY VE RNİYYÖNTEMLERİ İLE İNCELEMESİ
KANBER BAHATTİN,DOĞAN NURETTİN FURKAN,Tufik Othman
|
1 |
Cam/Aramid Hibrit Fiber Takviyesi ile birlikte Nano Grafen Katkısının Kompozit Plakaların Mekanik Özelliklerine Etkisinin Araştırılması
Projemizin konusu, günümüz mühendislik uygulamalarında sıkça kullanılan kompozit malzemelerin, darbe dayanımına fiber hibridizasyonunun yanında nano parçacık katkısı etkisinin incelenmesi ve darbe dayanımının artırılmasını sağlamak üzerinedir.
|
|---|---|
2 |
Jüt/cam fiber nanosilika katkılı hibrid kompozitlerin mekanik özelliklerinin araştırılması
Bu projenin amacı, jüt / cam elyaf takviyeli nanosilika katkılı epoksi esaslı hibrit kompozitlerin üretilmesi ve mekanik davranışını incelemek için yapılmıştır.
|
3 |
Elyaf Sarma İşleminde Üretim Hızını Ve Esnekliğini Artırmaya Yönelik Yeni Bir Yöntem Uygulaması
|
| Dönem | Ders Adı | Dili | Saat | |
|---|---|---|---|---|
| 1 | 2019-2020 | Mühendislik Mekaniği 1 (Statik) | Türkçe | 4 |
| 2 | 2019-2020 | Algoritma ve Programlamaya Giriş | Türkçe | 4 |
| 3 | 2020-2021 | Mukavemet | Türkçe | 4 |
| 4 | 2020-2021 | Bilgisayar Programlama | Türkçe | 3 |
| 5 | 2020-2021 | Statik | Türkçe | 4 |
| 6 | 2020-2021 | Algoritma ve Programlamaya Giriş | Türkçe | 4 |
| 7 | 2020-2021 | Sayısal Analiz | Türkçe | 3 |
| 8 | 2021-2022 | Makina Dinamiği | Türkçe | 4 |
| 9 | 2020-2021 | Mekanizma Tekniği | Türkçe | 4 |
| Durum | Tez Adı | Hazırlayan | Kaynak | Yıl | |
|---|---|---|---|---|---|
| 1 | Tamamlandı | Investigation of mechanical characteristics of carbon-aramid fiber reinforced hybrid composite with nano graphene doped epoxy | FATİH HARUN ÖZDUMAN | TezMerkezi | 2022 |
