GAZİANTEP ÜNİVERSİTESİ
MÜHENDİSLİK FAKÜLTESİ MAKİNA MÜHENDİSLİĞİ
ERRATA for Thermodynamics Table Book in 4’th Edition |
Döküman/Dosya errata_thermodynamic_tables_4thedn15418.doc |
1 |
Advances in Design, Simulation and Manufacturing II
Bölüm Adı: An Updated Portrait of Numerical Analyseson Spout-Fluidized Bed Incineration Systems |
---|
1 |
District heating based on exhaust gas produced from end-of-life tires in Erzincan: Thermoeconomic analysis and optimization
GÜNGÖR OSMAN,TOZLU ALPEREN,ARSLANTÜRK CİHAT,ÖZAHİ EMRAH
|
---|---|
2 |
A comparative thermoeconomic analysis and optimization of two different combined cycles by utilizing waste heat source of an MSWPP
ÖZAHİ EMRAH, ABUŞOĞLU AYŞEGÜL, TOZLU ALPEREN
|
3 |
Municipal solid waste-based district heating and electricity production: A case study
TOZLU ALPEREN, ABUŞOĞLU AYŞEGÜL, ÖZAHİ EMRAH, Anvari-Moghaddam Amjad
|
4 |
COMPARISON OF FIVE DEVELOPED POWER CYCLES IN THE FRAME OF WASTE HEAT RECOVERY
TOZLU ALPEREN, ABUŞOĞLU AYŞEGÜL, ÖZAHİ EMRAH
|
5 |
THERMAL SEAL FORCE OF COATED BIDIRECTIONAL STRETCHED PET FILM USED IN FOOD PACKAGING INDUSTRY
ÖZAHİ EMRAH, TIKILOĞLU ÇAĞRI
|
6 |
Thermoeconomic analyses of an actual power plant
TOZLU ALPEREN,BÜYÜKMURAT YEKTA TOLGA,ÖZAHİ EMRAH
|
7 |
Optimization of an adapted Kalina cycle to an actual municipal solid waste power plant by using NSGA-II method
ÖZAHİ EMRAH,TOZLU ALPEREN
|
8 |
Thermodynamic and thermoeconomic analyses of an organic Rankine cycle adapted gas turbine cycle using S-CO2
TOZLU ALPEREN,ÖZAHİ EMRAH,ABUŞOĞLU AYŞEGÜL
|
9 |
Thermoeconomic multi-objective optimization of an organic Rankine cycle (ORC) adapted to an existing solid waste power plant
ÖZAHİ EMRAH,TOZLU ALPEREN,ABUŞOĞLU AYŞEGÜL
|
10 |
Thermoeconomic analysis and optimization of a Re-compression supercritical CO2 cycle using waste heat of Gaziantep Municipal Solid Waste Power Plant
TOZLU ALPEREN,ABUŞOĞLU AYŞEGÜL,ÖZAHİ EMRAH
|
11 |
Thermoeconomic Analysis and Assessment of Gaziantep Municipal Solid Waste Power Plant
TOZLU ALPEREN,ABUŞOĞLU AYŞEGÜL,ÖZAHİ EMRAH
|
12 |
Thermodynamic Performance Assessment of Different Fluids in a Typical Organic Rankine Cycle for Usage in Municipal Solid Waste Power Plant
ÖZAHİ EMRAH,TOZLU ALPEREN,ABUŞOĞLU AYŞEGÜL
|
13 |
Thermoeconomic Analysis and Assessment of Gaziantep Municipal Solid Waste Power Plant
TOZLU ALPEREN,ABUŞOĞLU AYŞEGÜL,ÖZAHİ EMRAH
|
14 |
Life cycle assessment (LCA) of digested sewage sludge incineration for heat and power production
ABUŞOĞLU AYŞEGÜL,ÖZAHİ EMRAH,KUTLAR AHMET İHSAN,ALJAF HAMEED
|
15 |
A non-dimensional oscillation parameter describing interactive influence of oscillation frequency and velocity amplitude ratio for use in pulsatile flows
ÖZAHİ EMRAH,ÇARPINLIOĞLU MELDA
|
16 |
A comparative thermodynamic and economic analysis and assessment of a conventional HVAC and a VRF system in a social and cultural center building
ÖZAHİ EMRAH,ABUŞOĞLU AYŞEGÜL,KUTLAR AHMET İHSAN,DAĞCI OĞUZHAN
|
17 |
Exergy analyses of green hydrogen production methods from biogas-based electricity and sewage sludge
ABUŞOĞLU AYŞEGÜL,ÖZAHİ EMRAH,KUTLAR AHMET İHSAN,DEMİR SİNAN
|
18 |
Thermodynamic Performance Assessment of Different Fluids in a Typical Organic Rankine Cycle for Usage in Municipal Solid Waste Power Plant
ÖZAHİ EMRAH,TOZLU ALPEREN,ABUŞOĞLU AYŞEGÜL
|
19 |
Waste to energy technologies for municipal solid waste management in Gaziantep
TOZLU ALPEREN,ÖZAHİ EMRAH,ABUŞOĞLU AYŞEGÜL
|
20 |
Energetic and exergetic analyses of a solid waste power plant using Aspen Plus
TOZLU ALPEREN,ÖZAHİ EMRAH,ABUŞOĞLU AYŞEGÜL
|
21 |
An adapted organic Rankine cycle - ORC in Gaziantep Municipal Solid Waste Power Plant
ÖZAHİ EMRAH,TOZLU ALPEREN,ABUŞOĞLU AYŞEGÜL
|
22 |
A portrait of sewage sludge use for sustainable energy recovery potential in Turkey in the frame of EU environmental legislations
ABUŞOĞLU AYŞEGÜL,ÖZAHİ EMRAH,TOZLU ALPEREN
|
23 |
Energy and Economic Analyses of Models Developed for Sustainable Hydrogen Production from Biogas Based Electricity and Sewage Sludge
ABUŞOĞLU AYŞEGÜL,DEMİR SİNAN,ÖZAHİ EMRAH
|
24 |
Thermodynamic Assessment of HVAC Application in Buildings: A Case Study
DAĞCI OĞUZHAN,ÖZAHİ EMRAH,ABUŞOĞLU AYŞEGÜL
|
25 |
An analysis on the pressure loss through perforated plates at moderate Reynolds numbers in turbulent flow regime
ÖZAHİ EMRAH
|
26 |
Drying performance analysis of a batch type fluidized bed drying process for corn and unshelled pistachio nut regarding to energetic and exergetic efficiencies
ÖZAHİ EMRAH,DEMİR HACIMURAT
|
27 |
Definition of sub classes in sinusoidal pulsatile air flow at onset of transition to turbulence in view of velocity and frictional field analyses
ÖZAHİ EMRAH,ÇARPINLIOĞLU MELDA
|
28 |
DEVISED APPLICATION OF LABVIEW FOR AN AUTOMATIC TEST SYSTEM BASED ON GENERATION CONTROL AND PROCESSING OF PULSATILE PIPE FLOWS
ÖZAHİ EMRAH,ÇARPINLIOĞLU MELDA
|
29 |
Presentation of a test rig with its experimental procedure and uncertainty analysis of measurements for batch type fluidized bed drying of corn and unshelled pistachio nut
ÖZAHİ EMRAH,DEMİR HACIMURAT
|
30 |
Determination of transition onset in laminar pulsatile pipe flows
ÖZAHİ EMRAH,ÇARPINLIOĞLU MELDA
|
31 |
A model for the thermodynamic analysis in a batch type fluidized bed dryer
ÖZAHİ EMRAH,DEMİR HACIMURAT
|
32 |
An experimental test system for the generation control and analysis of sinusoidal pulsatile pipe flows An application case for time dependent flow measurements
ÇARPINLIOĞLU MELDA,ÖZAHİ EMRAH
|
33 |
An Updated Portrait of Transition to Turbulence in Laminar Pipe Flows with Periodic Time Dependence A Correlation Study
ÇARPINLIOĞLU MELDA,ÖZAHİ EMRAH
|
34 |
Laminar flow control via utilization of pipe entrance inserts a comment on entrance length concept
ÇARPINLIOĞLU MELDA,ÖZAHİ EMRAH
|
35 |
Simple methods for low speed calibration of hot wire anemometers
ÖZAHİ EMRAH,ÇARPINLIOĞLU MELDA,GÜNDOĞDU MEHMET YAŞAR
|
36 |
Determination of laminar and turbulent flow ranges through vertical packed beds in terms of particle friction factors
ÇARPINLIOĞLU MELDA,ÖZAHİ EMRAH,GÜNDOĞDU MEHMET YAŞAR
|
37 |
A Modification on Ergun s Correlation for Use in Cylindrical Packed Beds With Non spherical Particles
ÖZAHİ EMRAH,GÜNDOĞDU MEHMET YAŞAR,ÇARPINLIOĞLU MELDA
|
38 |
A simplified correlation for fixed bed pressure drop
ÇARPINLIOĞLU MELDA,ÖZAHİ EMRAH
|
1 |
AN EXPERIMENTAL STUDY ON THE PARAMETERS AFFECTING THE THERMAL SEAL FORCE OF COATED BIDIRECTIONAL STRETCHED PET FILM FOR FOOD PACKAGING APPLICATIONS
TIKILOĞLU ÇAĞRI, ÖZAHİ EMRAH
|
---|---|
2 |
A COMPARATIVE STUDY ON NUMERICAL AND EXPERIMENTAL ANALYSES OF A 3-D SPOUTED BED
ÖZAHİ EMRAH, ÇUTAY ARİF, TOZLU ALPEREN
|
3 |
A COMPARATIVE STUDY ON NUMERICAL AND EXPERIMENTALANALYSES OF A 3-D SPOUTED BED
ÖZAHİ EMRAH,ÇUTAY ARİF,TOZLU ALPEREN
|
4 |
COMPARISON OF FIVE DEVELOPED POWER CYCLES IN THE FRAME OF WASTE HEAT RECOVERY
TOZLU ALPEREN,ABUŞOĞLU AYŞEGÜL,ÖZAHİ EMRAH
|
5 |
Thermodynamic Analyses of an Actual Power Plant
TOZLU ALPEREN,BÜYÜKMURAT YEKTA TOLGA,ÖZAHİ EMRAH
|
6 |
An Investigation on an Anaerobic Digestion Process
TOZLU ALPEREN,ÖZAHİ EMRAH
|
7 |
A Case Study on an Actual Power Plant in terms of Thermodynamic Aspect
ÖZAHİ EMRAH,TOZLU ALPEREN
|
8 |
A Parametric Study on Sustainable Models Developed for Waste Energy Recovery in a Typical Municipal Solid Waste Power Plant
ÖZAHİ EMRAH,TOZLU ALPEREN
|
9 |
Thermodynamic Performance Analysis of Two Different Solid Waste Power Plant Gas Engines
ÖZAHİ EMRAH,TOZLU ALPEREN,BÜYÜKMURAT YEKTA TOLGA
|
10 |
Thermoeconomic Analyses and Assessment of Combined Systems: GT-ORC and GT-KAL cycle
TOZLU ALPEREN,ÖZAHİ EMRAH,ABUŞOĞLU AYŞEGÜL
|
11 |
A Thermodynamic Comparison of Gas Turbine, Kalina and Organic Rankine Cycles in frame of Waste Heat Recovery
TOZLU ALPEREN,ÖZAHİ EMRAH,ABUŞOĞLU AYŞEGÜL
|
12 |
Thermoeconomic Analyses and Assessment of Combined Systems: GT-ORC and GT-KAL cycle
TOZLU ALPEREN,ÖZAHİ EMRAH,ABUŞOĞLU AYŞEGÜL
|
13 |
A Thermodynamic Comparison of Gas Turbine, Kalina and Organic Rankine Cycles in frame of Waste Heat Recovery
TOZLU ALPEREN,ÖZAHİ EMRAH,ABUŞOĞLU AYŞEGÜL
|
14 |
Thermodynamic Assessment of a Typical Municipal Solid Waste Power Plant in Malatya, Turkey
ÖZAHİ EMRAH,TOZLU ALPEREN,BÜYÜKMURAT YEKTA TOLGA
|
15 |
A General Overview on Anaerobic Digestion Process in the World
ÖZAHİ EMRAH,TOZLU ALPEREN
|
16 |
Environmental Impact Assessment of Sewage Sludge Use in Energy Recovery
ABUŞOĞLU AYŞEGÜL,ÖZAHİ EMRAH,TOZLU ALPEREN
|
17 |
Auxiliary Heat and Power Productions in a Sewage Treatment Facility
ABUŞOĞLU AYŞEGÜL,ÖZAHİ EMRAH,TOZLU ALPEREN
|
18 |
Energy and Exergy Analyses of a Gas Turbine Developed for Heat Recovery in a MSW Power Plant
TOZLU ALPEREN,ÖZAHİ EMRAH,ABUŞOĞLU AYŞEGÜL
|
19 |
A Developed Closed-Cycle GT Using Transcritical CO2 for WHR in a Typical MSW Power Plant
TOZLU ALPEREN,ÖZAHİ EMRAH,ABUŞOĞLU AYŞEGÜL
|
20 |
Thermodynamic Analyses of a Coal-Fired Power Plant in İzmir, Turkey
ÖZAHİ EMRAH,TOZLU ALPEREN,ABUŞOĞLU AYŞEGÜL,KUTLAR AHMET İHSAN
|
21 |
Energy and Exergy Analyses of a Gas Turbine Developed for Heat Recovery in a MSW Power Plant.
TOZLU ALPEREN,ÖZAHİ EMRAH,ABUŞOĞLU AYŞEGÜL
|
22 |
A Developed Closed-Cycle GT Using Transcritical CO2 for WHR in a Typical MSW Power Plant.
TOZLU ALPEREN,ÖZAHİ EMRAH,ABUŞOĞLU AYŞEGÜL
|
23 |
Thermodynamic Analyses of a Coal-Fired Power Plant in Izmir, Turkey.
ÖZAHİ EMRAH,TOZLU ALPEREN,ABUŞOĞLU AYŞEGÜL,KUTLAR AHMET İHSAN
|
24 |
Auxiliary Heat and Power Productions in a Sewage Treatment Facility
ABUŞOĞLU AYŞEGÜL,ÖZAHİ EMRAH,TOZLU ALPEREN
|
25 |
Environmental Impact Assessment of Sewage Sludge Use in Energy Recovery
ABUŞOĞLU AYŞEGÜL,ÖZAHİ EMRAH,TOZLU ALPEREN
|
26 |
Influence of Inner Geometry of Pipe Fittings on Pressure Drop in Steady Pipe Flow
ÖZAHİ EMRAH,TOZLU ALPEREN,ABUŞOĞLU AYŞEGÜL,KUTLAR AHMET İHSAN
|
27 |
Influence of Inner Geometry of Pipe Fittings on Pressure Drop in Steady Pipe Flow.
ÖZAHİ EMRAH,TOZLU ALPEREN,ABUŞOĞLU AYŞEGÜL,KUTLAR AHMET İHSAN
|
28 |
Thermodynamic Analyses of a Coal-Fired Power Plant in İzmir, Turkey.
ÖZAHİ EMRAH,TOZLU ALPEREN,ABUŞOĞLU AYŞEGÜL,KUTLAR AHMET İHSAN
|
29 |
Thermodynamic Analyses of Gaziantep Municipal Solid Waste Power Plant
TOZLU ALPEREN,ÖZAHİ EMRAH,ABUŞOĞLU AYŞEGÜL
|
30 |
A study on energetic efficiency of a batch type fluidized bed dryer
ÖZAHİ EMRAH,DEMİR HACIMURAT
|
31 |
A general view on municipal solid waste management in Gaziantep
TOZLU ALPEREN,ÖZAHİ EMRAH,ABUŞOĞLU AYŞEGÜL
|
32 |
Akışkan yataklı bir kurutucuda enerji ve ekserji açısından bir termodinamik analiz
ÖZAHİ EMRAH,DEMİR HACIMURAT
|
33 |
Frictional field analysis in sinusoidal pulsatile pipe flow at onset of transition
E. Özahi, M. Ö. Çarpınlıoğlu
|
34 |
Fluidized bed drying performance in terms of drying rates
E. Özahi, H. Demir
|
35 |
A case study on the drying performance of batch type fluidized bed dryers at constant drying temperatures
E. Özahi, H. Demir
|
36 |
A theoretical approach for the thermodynamic analysis of absorption refrigeration systems through a case study
M. Ö. Çarpınlıoğlu, E. Özahi, H. Kareem
|
37 |
Recent developments on fluidized bed drying of particles
E. Özahi, M. Ö. Çarpınlıoğlu, H. Demir
|
38 |
Modes of flow in pneumatic conveying systems
A. Tozlu, E. Özahi, A. İ. Kutlar, M. Ö. Çarpınlıoğlu
|
39 |
An experimental research project on sinusoidal pulsatile pipe flows Part 2 Influence of oscillation frequency and amplitude on onset of transition to turbulence
M. Ö. Çarpınlıoğlu, E. Özahi
|
40 |
An experimental research project on sinusoidal pulsatile pipe flows Part 1 Presentation of software programming utilized for measurements and data acquisition
E. Özahi, M. Ö. Çarpınlıoğlu
|
41 |
Periodic flow as an alternative for pneumatic conveying pipelines Presentation of an experimental test case
E. Özahi, M. Ö. Çarpınlıoğlu
|
42 |
Transitional characteristics of pulsatile pipe flows as a control and modelling tool for pneumatic transport of solid particles
M.Ö. Çarpınlıoğlu, E. Özahi
|
43 |
A brief review on laminar to turbulent transition in time dependent pipe flows
E. Özahi, M.Ö.Çarpınlıoğlu
|
1 |
ZAMANA BAĞIMLI BORU İÇİ AKIMLARINDA LAMINAR TURBULENT GEÇİŞE İLİŞKİN DENEYSEL BİR ARAŞTIRMA
|
---|---|
2 |
BİYOBOZUNUR KATI ATIK TESİSLERİNİN TERMODİNAMİK, TERMOEKONOMİK ANALİZ VE OPTİMİZASYONLARI ÇERÇEVESİNDE YENİLENEBİLİR ENERJİ POTANSİYELLERİNİN ARAŞTIRILMASI VE SIFIR ATIK YAKLAŞIMIYLA SÜRDÜRÜLEBİLİR MODELLERİN GELİŞTİRİLMESİ
Bu çalışmada Gaziantep te bulunan Gaziantep Katı Atıktan Enerji Üretim Tesisi nin gerçek çalışma verileri kullanılarak termodinamik ve termoekonomik analizleri gerçekleştirilmiştir Sistemin termodinamik analizlerin gerçekleştirilmesi için ASPEN Plu
|
3 |
Design, Development, Implementation and Assessment of Skill Formation Process in the Frame of VET for RD Staff 2018-1-TR01-KA202-059252
In today’s world, where science and technology fields are experiencing new developments day by day, RD has the undeniable importance both in the private sector and in the countries. As is known, RD activities are systematic studies that can only be c
|
4 |
BAKLİYATLARIN KURUTULMASINDA YÜKSEK KALİTEDE ÜRÜN VE ENERJİ TASARRUFU SAĞLAMAK İÇİN ATMOSFER BASINCINDA ÇALIŞAN AKIŞKAN YATAKLI ENDÜSTRİYEL BİR KURUTUCU SİSTEMİ TASARIMI ÜRETİMİ VE DENEYSEL ARAŞTIRMASI
|
1 |
SÜPERFİLM A.Ş.
PROJE MÜHENDİSİ
|
---|
Dönem | Ders Adı | Dili | Saat | |
---|---|---|---|---|
1 | 2014-2015 | ADVANCED FLUİD MECHANİCS | İngilizce | 3 |
2 | 2014-2015 | EXPERİMENTAL METHODS İN FLUİD DYNAMİCS | İngilizce | 3 |
3 | 2014-2015 | Advanced Thermodynamics II | İngilizce | 3 |
4 | 2020-2021 | Advanced Fluid Mechanics | İngilizce | 3 |
5 | 2020-2021 | Boundary Layer Theory I | İngilizce | 3 |
6 | 2021-2022 | Advanced Fluid Mechanics | İngilizce | 3 |
7 | 2021-2022 | Boundary Layer Theory I | İngilizce | 3 |
8 | 2012-2013 | Turbulence | İngilizce | 3 |
9 | 2011-2012 | Turbulence | İngilizce | 3 |
10 | 2012-2013 | Boundary Layer Theory II | İngilizce | 3 |
11 | 2012-2013 | Advanced Fluid Mechanics | İngilizce | 3 |
12 | 2013-2014 | Boundary Layer Theory I | İngilizce | 3 |
13 | 2013-2014 | Experimental Methods in Fluid Dynamics | İngilizce | 3 |
Dönem | Ders Adı | Dili | Saat | |
---|---|---|---|---|
1 | 2014-2015 | ADVANCED FLUİD MECHANİCS | İngilizce | 3 |
2 | 2014-2015 | EXPERİMENTAL METHODS İN FLUİD DYNAMİCS | İngilizce | 3 |
3 | 2014-2015 | Advanced Thermodynamics II | İngilizce | 3 |
4 | 2015-2016 | BOUNDARY LAYER THEORY II | İngilizce | 3 |
5 | 2015-2016 | TURBULENCE | İngilizce | 3 |
6 | 2019-2020 | Advanced Fluid Mechanics | İngilizce | 3 |
7 | 2019-2020 | Boundary Layer Theory I | İngilizce | 3 |
8 | 2019-2020 | Boundary Layer Theory II | İngilizce | 3 |
9 | 2019-2020 | Advanced Fluid Mechanics | İngilizce | 3 |
10 | 2020-2021 | Endüstri 4.0 | Türkçe | 3 |
11 | 2021-2022 | Advanced Fluid Mechanics | İngilizce | 3 |
12 | 2021-2022 | Boundary Layer Theory I | İngilizce | 3 |
13 | 2012-2013 | Turbulence | İngilizce | 3 |
14 | 2011-2012 | Turbulence | İngilizce | 3 |
15 | 2012-2013 | Boundary Layer Theory II | İngilizce | 3 |
16 | 2012-2013 | Advanced Fluid Mechanics | İngilizce | 3 |
17 | 2013-2014 | Boundary Layer Theory I | İngilizce | 3 |
18 | 2013-2014 | Experimental Methods in Fluid Dynamics | İngilizce | 3 |
Dönem | Ders Adı | Dili | Saat | |
---|---|---|---|---|
1 | 2015-2016 | THERMODYNAMİCS I | İngilizce | 4 |
2 | 2014-2015 | THERMODYNAMİCS I | İngilizce | 4 |
3 | 2014-2015 | INSULATİON | İngilizce | 3 |
4 | 2015-2016 | GRADUATİON PROJECT | İngilizce | 2 |
5 | 2014-2015 | GRADUATİON PROJECT | İngilizce | 2 |
6 | 2019-2020 | Mechanical Engineering Laboratory | İngilizce | 5 |
7 | 2019-2020 | Mechanical Engineering Laboratory | İngilizce | 5 |
8 | 2019-2020 | Mechanical Engineering Laboratory (İ.Ö) | İngilizce | 5 |
9 | 2019-2020 | Mechanical Engineering Laboratory (İ.Ö.) | İngilizce | 5 |
10 | 2020-2021 | Thermodynamics I | İngilizce | 4 |
11 | 2020-2021 | Thermodynamics I (İ.Ö.) | İngilizce | 4 |
12 | 2020-2021 | Insulation | İngilizce | 3 |
13 | 2020-2021 | Insulation (İ.Ö.) | İngilizce | 3 |
14 | 2021-2022 | Thermodynamics I | İngilizce | 4 |
15 | 2021-2022 | Thermodynamics I (İ.Ö.) | İngilizce | 4 |
16 | 2021-2022 | Insulation | İngilizce | 3 |
17 | 2021-2022 | Insulation (İ.Ö.) | İngilizce | 3 |
18 | 2011-2012 | Thermodynamics I | İngilizce | 4 |
19 | 2012-2013 | Thermodynamics I | İngilizce | 4 |
20 | 2011-2012 | Thermodynamics II | İngilizce | 5 |
21 | 2012-2013 | Fluid Mechanics II | İngilizce | 4 |
22 | 2011-2012 | Fluid Mechanics II | İngilizce | 4 |
23 | 2012-2013 | Insulation | İngilizce | 3 |
24 | 2011-2012 | Insulation | İngilizce | 3 |
25 | 2013-2014 | Graduation Project | İngilizce | 2 |
26 | 2012-2013 | Graduation Project | İngilizce | 2 |
27 | 2011-2012 | Graduation Project | İngilizce | 2 |
28 | 2013-2014 | Applied Engineering Education | İngilizce | 4 |
29 | 2012-2013 | Applied Engineering Education | İngilizce | 4 |
30 | 2013-2014 | Fluid Mechanics I | İngilizce | 5 |
31 | 2013-2014 | Thermodynamics I | İngilizce | 4 |
Durum | Tez Adı | Hazırlayan | Kaynak | Yıl | |
---|---|---|---|---|---|
1 | Tamamlandı | An investigation of renewable energy potential of municipal biodegradable solid waste plants in frame of thermodynamic, thermoeconomic analysis and optimization and developing sustainable models using zero waste approach | ALPEREN TOZLU | TezMerkezi | 2017 |
Durum | Tez Adı | Hazırlayan | Kaynak | Yıl | |
---|---|---|---|---|---|
1 | Tamamlandı | Gıda paketleme uygulamalarında kullanılan bopet filmin ısıl yapışma optimizasyonu | ÇAĞRI TIKILOĞLU | TezMerkezi | 2022 |
2 | Tamamlandı | Design of spout-fluidized bed (SFB) in terms of hydrodynamic aspect utilizing numerical method | ARİF ÇUTAY | TezMerkezi | 2021 |
3 | Tamamlandı | Thermodynamic and economic analyses and assessment of a power plant | YEKTA TOLGA BÜYÜKMURAT | TezMerkezi | 2018 |
4 | Tamamlandı | Static aeroelastic analysis of high aspect ratio flexible wing | SUNA GÜÇYILMAZ | TezMerkezi | 2016 |
5 | Tamamlandı | A comparative thermodynamic and economic analyses of conventional and VRF HVAK applications in buildings: A social and cultural center case study | OĞUZHAN DAĞCI | TezMerkezi | 2015 |
6 | Tamamlandı | An experimental study on drying of food materials in a fluidized bed dryer | HACIMURAT DEMİR | TezMerkezi | 2014 |
1 |
1.ULUSAL YENİLENEBİLİR ENERJİ VE EKSERJİ ÇALIŞTAYI VE SERGİSİ (ULECS’ 16)
Gaziantep Üniversitesi Makine Mühendisliği bünyesinde gerçekleştirilen çalıştayda, ulusal boyutta atıktan enerji geri kazanımı konularında akademisyen, sanayici, öğrenci ve diğer ilgili kişilerin bilgi birikimlerini bir araya getirerek bir beyin fırt
|
---|---|
2 |
1.ULUSAL ATIKTAN ENERJİ ÇALIŞTAYI VE SERGİSİ ( ULATECS’ 16)
Gaziantep Üniversitesi Makine Mühendisliği bünyesinde gerçekleştirilen çalıştayda, ulusal boyutta atıktan enerji geri kazanımı konularında akademisyen, sanayici, öğrenci ve diğer ilgili kişilerin bilgi birikimlerini bir araya getirerek bir beyin fırt
|
1 |
Freight Pipeline Society
Üye 2012 |
---|---|
2 |
Türk Isı Bilimi ve Tekniği Derneği
Üye 2012 |
1 |
1.ULUSAL YENİLENEBİLİR ENERJİ VE EKSERJİ ÇALIŞTAYI VE SERGİSİ (ULECS’ 16)
Etkinlik Yeri: GAZİANTEP ÜNİVERSİTESİ MAKİNE MÜHENDİSLİĞİ KONFERANS SALONU
|
---|---|
2 |
1.ULUSAL ATIKTAN ENERJİ ÇALIŞTAYI VE SERGİSİ ( ULATECS’ 16)
Etkinlik Yeri: GAZİANTEP ÜNİVERSİTESİ MAKİNE MÜHENDİSLİĞİ KONFERANS SALONU
|